Home About us Site Map Contact Us Careers
Products Application Guide How to Order Distributors Enquiry Form News
Special Resistor Selection Guide
Precision Resistors
Low Ohmic Resistors
Aluminium Housed Power Resistors
Capacitor Discharge/Symmetry Resistors
Thick Film Heat Sink Resistors
Braking Resistors
Power
Range & TCR
Rated @oC
Ohmic Range
Tolerance %
Series
Types
Resistor Construction
Key Features
High Precision Instrumentation Resistors

0.5W-2W (to ▒ 10ppm)

25oC
0R1-100K
0.5%, 0.1%,0.05%
PR1,PR2,PR3,PR4
1. High Temp. Silicone Coating.
2. Close Tolerance, Low TCR.
3. Non Inductive Versions.
4. Low Temperature Rise.
5. High Stability.
6. Suitable for Instrumentation.
High Precision, High Stability, Plastic Case

0.1W-0.75W (to ▒ 5ppm)

25oC
50R-10M
0.1%,0.05%,
0.02%,0.01%
E010,E020,E025,E030,
E060,E080 
1. Multilayer Precision Wound.
2. Moulded Case Protection.
3. High Stability Reference Resistor.
4. Low Inductance Winding.
5. High Resistance Values.
6. Close Tolerance upto 0.01%.
Ceramic Cased, Low Ohmic, Non Inductive

4W 950-160ppm

70oC
R005-R051
1%,2%, 5%,10%
PCL4
1. Very Low Ohmic Values.
2. Non Inductive Construction <20nH.
3. For Current Sensing / HF Circuits.
4. High Strength Weld Joints.
5. Low Temperature Rise.
6. High Insulation Resistance.
7. Non Flammable Construction.
Epoxy Moulded, Low Ohmic, Non inductive

4.5W-5W (Based on R Value)

25oC
R005-R075
1%,2%, 5%,10%
PML4,PML5
1. Very Low Ohmic Values.
2. Non Inductive Construction <20nH.
3. For Current Sensing / HF Circuits.
4. Epoxy Moulded Casing.
5. High Moisture Resistance.
6. High Strength Weld Joints.
7. High Insulation Resistance.
Aluminium Housed Resistors

25W,50W (to ▒ 20ppm)

25o
0R05-100K
0.1%,0.5%,
1%,2%,5%,
10%
PHA25,PHA50
1. Moulded into Aluminium Housing.
    1%,2% >10W: <50
2. High Power / Size Ratio. 5%,10%
    MIL: <20
3. BS-CECC-40203 / MIL-R-18546.
4. Gold Anodised Heat Sink.
Capacitor Discharge & Symmetry Resistors

10W & 13W (to ▒ 20ppm)

25o
100R-100K
1%,2%,5%,
10%
PYP10 & PYP13
1. Direct Mounting on Capacitors.
2. High Pulse-Withstand Capability.
3. Stainless Steel Terminals.
4. Two Mounting Pitches Available.
5. Moisture Resistant Silicone Coat.
6. Superior Quality Weld Joints.
Thick Film Heat Sink Resistors

100W-600W

25oC
R20-1M
1%,2%,5%,
10%
BDS100, BDS250
1.Smallest Possible Package
2.High Overloadá Capability
Braking Resistors
275W-1000W
25o
0R1-27K
1%,2%,5%,
10%
CJS200, CJS220, CJS360,
CJCS420, CJS5500, CJS1000
1.High Energy Absorption Capability
2.Suitable for Dynamic Braking
1

Home Products  |  Application Guide How to order  |  Distributors  |  Enquiry Form  |  News

© Copyright 2002, Precision Electronic Components MFG. Co.